Download the "The OWL USB Connect 2 Control.exe" file and extract to the same folder as the original software (C:\Program Files\2SE\The OWL USB Connect 2). The Run stop.bat
For a Full CSV file unplug/plugin the OWL then start the program
If the program crashes, re-run HawkOWL, it will add new data to the old file
Remove "The OWL USB Connect"
Because the Original Software stays in memory, permently connected to the Com port, you will need to either temporarily disable or uninstall the Original Software
Disable
...
Uninstall
Ctrl Panel Add/Remove
Exploitable Quirk
I've noticed with the CM-160, and both my S/W and the owl's own S/W. If the display is left unpluged from the PC, it will only log data every few Min's. If however the display is pluged into the PC's USB port and either S/W is conected, usage is logged up to 15 times a minute (depending on the speed of the PC, and what its doing at the time).
Installation
Simply run the setup.exe in the download, no need to remove old versions.
Select the Com port your OWL is connected to (use Windows Device manager to discover which port if your unsure.
Select 'All data' or 'One Minute Intervals'. 'All Data' records data up to every 6 seconds. 'One Minute Intervals' records the usage over a full minute
Click Conect to start downloading data from your OWL. It will take 5-10 Sec to start getting data
Adjust File update Time as required ( refers to the CSV file not the dat file. dat file is constantly updated, but unavailable to the end user)
Usable data is found in the 5.4.24.0.CSV' file
